Heading365 B787 FMS Trainer Customization

Please select your preferred configuration settings (AMI/OPC). All fields are pre-filled with default values. If you want to keep only defaults, you can simply press the submit button. You can save the already completed entries to continue at a later stage using the button below the form.

"*" indicates required fields

Please enter your name and company.

General

Mass Unit*
Length Unit*

Airline Modifiable Information (AMI) Options

Is Thrust Reduction Flaps*
Determines if the thrust reduction point is determined by a flaps position
Take-Off Gross Weight Modifiable*
Determines if the T/O-GW is insertable on the TAKE OFF REF page
Route Print Enabled*
Determines if the route can be printed
Please enter a number from -99 to -1.
The minimum allowed fuel temperature in °C (-99 to -1°C)
Please enter a number from 14 to 44.
The default cruise CG in % (14 - 44%)
Please enter a number from 400 to 9999.
The default acceleration height (400 - 9999 feet)
Please enter a number from 400 to 9999.
The default engine out acceleration height (400 - 9999 feet)
Please enter a number from 400 to 9999.
The default thrust reduction height (400 - 9999 feet)
Thrust Reduction Flap Setting*
The thrust reduction point flaps setting, if enabled
Please enter a number from -5 to 9.9.
The drag factor in % for idle performance (-5 to 9.9%)
Please enter a number from -5 to 9.9.
The drag factor in % for approach performance (-5 to 9.9%)
Please enter a number from -5 to 9.9.
The drag factor in % for engine-out calculations (-5 to 9.9%)
Please enter a number from 0 to 100.
In %, specify 0 to disable
Please enter a number from 0 to 100.
In %, specify 0 to disable
Cruise Thrust Limit*
The default cruise thrust limit
Please enter a number from 1.2 to 1.3.
The remaining g-load margin at maximum altitude (1.2 - 1.3g)
Please enter a number less than or equal to 500.
The minimum residual climb rate at maximum altitude (0 - 500 ft/min)
Please enter a number from 0 to 500.
The residual cruise climb rate for step climbs (0 - 500 ft/min)
Default Step Climb Type*
The default step climb type
Is Step ICAO Inhibited*
Determines if entry of ICAO step climb sizes is inhibited
Is Step RVSM Inhibited*
Determines if entry of RVSM step climb sizes is inhibited
This field is hidden when viewing the form
Please enter a number from 0 to 4000.
The default step climb size when step climb type is NONE
Please enter a number from 0 to 4000.
Defines the minimum step size increment value
Please enter a number from 0 to 60.
The minimum time calculated to spend in cruise (in minutes)
Please enter a number from 0 to 20000.
The default speed limit altitude for climb/descent
Please enter a number from 0 to 340.
The default speed limit speed for climb/descent
Alternate Speed Schedule*
The cruise speed mode for alternate predictions
Company Speed Thrust Limit*
The thrust limit to be used when company speed is active
Please enter a number from 0 to 300.
The speed schedule for engine out mode - indicated airspeed
Please enter a number from 0 to 0.9.
The speed schedule for engine out mode - Mach
Please enter a number from 0 to 20000.
The altitude for calculating the holding over the alternate
Please enter a number from 0 to 4000.
The filter for alternate airports minimum runway length (in meters)
Please enter a number from 0.01 to 20.
The default RNP value for remote-area operations
Please enter a number from 0.01 to 20.
The default RNP value for enroute segments
Please enter a number from 0.01 to 20.
The default RNP value for terminal operations
Please enter a number from 0.01 to 20.
The default RNP value for approach operations

Operational Program Configuration (OPC) - Options

Inhibit Gross Weight Entry*
Determines if T/O-GW entry is inhibited on the TAKE OFF REF page
Take-Off Data Uplink Enabled*
Determines if the T/O-uplink function is enabled
APU-To-Pack Take-Off Enabled*
Determines if APU-to-pack T/O is enabled
Thrust Derate Enabled*
Determines if thrust derates are enabled at all
Thrust-Bump Take-Off enabled*
Determines if a Thrust-Bump T/O is selectable
Take-Off Speed Inhibited*
Inhibits the FMS-calculated V-Speeds to be displayed on the TAKE OFF REF page
V1 Inhibited*
Determines if the pilot-entered or uplinked V1 is limited to be at least the FMS-calculated V1
Flight Rules According JAA*
Determines if runway slope and condition are calculated according JAA or FAA
Alternate Take-Off Speeds*
Determines if uplinked alternate T/O speeds are enabled
No ADF Tuning*
Disables all ADF tuning if true
No Left ADF Tuning*
Disables the left ADF if true
No Right ADF Tuning*
Disables the right ADF if true
FIX Info Page Enhanced*
Determines if the basic (2 pages) or enhanced (4 pages) FIX INFO page is displayed
Vertical Bearing Enabled*
Determines if the vertical bearing is enabled on the VNAV DES page
Minimum Expanded*
Determines if standard minimums (-101ft - 15000ft) or expanded minimums (-1001ft - 20000ft) can be entered
ADS-B Enabled*
Determines if the ADS-B option is enabled
ND Track Up*
Determines if ND reference is track-up or heading-up

Optional Remarks

Any remarks regarding the entered data (optional, free text)
This field is for validation purposes and should be left unchanged.
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram